Back to all reports

Road markings say 30 in a 20 mile an hour zone

Reported in the Faded road markings category anonymously at 11:39, Monday 10 June 2019

Sent to Bath and North East Somerset Council 1 minute later. Council ref: 1654466.

We are trying to get a community speedwatch up and running and the police have assessed the road and deemed it too confusing for us to go ahead - see response: SPEED ENFORCEMENT UNIT RISK ASSESSMENT The location was attended today by both CEO Dean Brewis 7579 and CEO Paul Stone 7999. Unfortunately, the site cannot be approved for CSW operations due to the rather poor attempts to convert the old 30mph limit to the existing 20mph limit. Approaching from Bathford Hill, having passed the 20mph gateways, there is then a pristine 30mph roundel on the carriageway surface. There are also several 30mph roundels on Court Hill that have been made to be 20mph roundels, but still look like 30's. In addition, there are no repeaters along Culverhay having passed the entry 20mph gateways before the bridge. This all culminates in what can be construed as 'confusion' and not adequate guidance

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for your report, it will be reviewed by the appropriate team.

    Posted by Bath and North East Somerset Council at 10:41, Monday 10 June 2019

  • We have dealt with this issue and the report is now closed. Further comments may not be monitored.

    State changed to: Fixed

    Posted by Bath and North East Somerset Council at 16:54, Friday 14 June 2019

Provide an update

Your information will only be used in accordance with our privacy policy

Next: Tell us about you

Your update

Tell us about you

Do you have a FixMyStreet password?